Cromax WB07

Properties of Cromax® Pro WB07 waterborne basecoat

Cromax® Pro paints are easy to apply and provide excellent colour matching. Their excellent coverage/garnish balance saves a considerable amount of time and product. They can be used for joints, panels and complete paints. The use of the Controleur makes the Cromax® Pro Basecoat system flexible in use.

VOC compliant, in accordance with Directive 2004/42/EC.

Preparing Cromax Pro WB07 Paint

Cromax Pro basecoats need to be mixed with controllers and other ancillary products, depending on the humidity level and ambient temperature:

• WB2010 Cromax® Pro binder
• WB2030 Cromax® Pro viscosity regulator
• Controller WB2040 Cromax® Pro (standard condition)
• Connector WB2091 Cromax® Pro
• Cromax® Pro Activator WB2075

For the exact proportions to be used, please consult the technical data sheet available to download in PDF format.

Preparing surfaces before application

Clean the surface with a good preparation cleaner. Carry out any necessary repairs. Sand the surface mechanically (P400 - P500) or with water (P1000-P1200). Remove all traces of sanding dust by blowing with oil-free compressed air. Finish by degreasing with a good final cleaner/degreaser.

Applying Cromax Pro body paints

Cromax Pro finishes are suitable for fittings, panels and complete paints. They are applied in 2 coats for opaque colours and 1.5 coats for effect colours.

Support for base colour WB07

Cromax® Pro hydro Matt basecoats can be applied to :

• All original and repaired finishes.
• Cromax Refinish primers and 2K surfacers.

They can be overcoated with Cromax Refinish 3550S, 3750S, 3760S, 3800S, CC6400 and CC6600 Clearcoats.

When the Matt basecoat is completely matt, apply a Clearcoat. The maximum time for applying Clearcoat is 3 days, excluding contamination.