PPG T427

Properties of Envirobase T427-E1 PPG base paint

Envirobase T427-E1 is a discount bodywork base paint. Envirobase® hydro matt basecoats offer a high quality finish. They are easy to apply and always give a flawless, uneven finish. Gradients can be achieved simply, without the need for additives or Thinner. They dry as quickly as traditional solvent-based products. They have a low VOC content, so are environmentally friendly.

Preparing PPG bodywork paint

Mix Envirobase T427-E1 lacquer 100:10 to 30 with Thinner : PPG Envirobase Thinner T494 (for application at temperatures below 35°C).

Applying the preparation to the surface

PPG Envirobase Paints are suitable for both small and large repair surfaces. They are applied with a spray gun fitted with a 1.2 - 1.3 mm Nozzle, in 3 to 4 light coats or 2 to 3 medium coats. For glitter colours, a control coat is recommended.

Substrates compatible with Envirobase hydro bases

Before applying the colours, the substrate should be wet sanded with P800 paper or dry sanded with P500 paper. The surface must then be cleaned. Envirobase® paints can be applied over original 2K finishes or PPG Deltron GRS primers, except D838 Koba and D831 Universel. Envirobase colours can be overcoated with a wide range of PPG Clearcoats.

• Colour code : T427-E1
• Shade : yellow