Permahyd 280 Spies Hecker SH801 - White 1L

Introducing SH801 base colour from the Permahyd 280 range from Spies Hecker:

The Permahyd 280 base system belongs to the Spies Hecker professional brand. This Matt basecoat range is water-dilutable and of superior quality. It is based on a special technology of PU dispersions for high quality opaque and effect paints.

Advantages of the Permahyd 280 range :

• Excellent Theoretical coverage
• VOC compliant
• High colour accuracy
• Easy to apply in 1.5 coats
• Overcoat with Permasolid High Solid Clearcoats
• Reliable vertical stability

Types of application for the Permahyd 280/285/286 paint range :

The Spies Hecker tint can be applied in different ways depending on what you want:

1. Application for two-coat tints :

Before you start spraying your base onto your substrate, we strongly recommend that you use the appropriate personal protective equipment during application to avoid skin or eye irritation.

> Application surfaces :

• Old paint or original paint that has been properly sanded and cleaned.
• Primer

Surfaces must be properly prepared and cleaned prior to application and then sanded using Abrasive discs P500-P600 (machine) or P800-P1000 (hand).

> Gun setting :

• Nozzle diameter: 1.2-1.3 bar
• Spray pressure: 1.8-2 bar

> Number of coats:

Apply an even, closed first coat, then apply an effect coat, keeping a distance between you and the substrate.

2. Application for three-coat colours :

Mix your SH801 white colour with 5% Permahyd 9007 Additive. Also add 5 to 10% Spies Hecker 6000 demineralised water.

Once the area has been primed, apply your mixture until you obtain an opaque film. Then connect at reduced pressure, and leave to desolvate for 5 to 10 minutes. Then dry for 15 to 20 minutes at 60-65°C.

Next, apply your pearlescent pre-lacquer over the same area, extending the area of each subsequent coat by overlapping passes to ensure colour match with the original finish.

3. Application with Permahyd 9007 Additive:

For surface preparation, there is no difference to note depending on the type of Paint. To adjust the special bodywork spray gun:

• Compliant: nozzle diameter 1.2-1.3 mm / spray pressure 1.8-2 bar: inlet pressure.
• HVLP: nozzle diameter 1.2-1.3 mm / spray pressure 0.7 bar: atomisation pressure

Tech'team tip: for more information on gun adjustment, please refer to the manufacturer's technical data sheet.

Other Spies Hecker products available on the Carross website:

Find all the colours in the Permahyd range to complete all your car repairs: blue, fine black, red or even grey. The basic colours are of high quality and at discount prices for your car finishes. All our products are available for 24-hour delivery throughout France.