Introducing the Sagola Classic Lux spray gun
The Sagola Classic Lux is a professional airbrush gun designed for bodywork, paint and finishing work. In this version, fitted with a 2.5 mm Nozzle, it is particularly suited to the application of polyester primer, filling primer and thick products used in the Preparation of substrates prior to painting.
The Classic Lux Gravity / Suction range is declared by Sagola as a range of professional airbrush guns. In particular, it complies with Machinery Directive 2006/42/EC and ATEX Directive 2014/34/EC II 2G X, and is suitable for zones 1 and 2 according to the manufacturer's specifications.
This gun can be used in a bodywork workshop for the Preparation stages before colour base, Clearcoat or finish. It can be used on surfaces that need to be filled, corrected or evened out before the final paint system is applied.
Sagola Classic Lux features
2.5 mm Nozzle for polyester primer
The 2.5 mm Nozzle is suitable for thicker products, such as polyester primer and filling primers. It provides sufficient flow to deposit an even layer on the substrate, while making it easier to cover prepared areas. This configuration is useful for bodywork repairs requiring a good product load before sanding.
Application of preparation products
The Classic Lux Sagola can be used to spray medium to low viscosity products, as well as paints, Clearcoats and lacquers according to the manufacturer's intended use. In the case of polyester primers, it is important to ensure that the product is mixed, viscosified and filtered correctly before application, to ensure an even spray pattern.
Simple adjustments and jet control
The gun has settings for adjusting the product flow rate and fan width. Sagola recommends using the fluid regulator and fan regulator fully open to avoid premature wear of the Nozzle and needle, while still providing maximum spray air.
Technical data and manufacturer's information
- Brand: Sagola
- Model: Classic Lux
- Application: polyester primer, filling primer, bodywork Preparation products
- Nozzle: 2.5 mm
- Type: airbrush gun
- Range: Classic Lux Gravity / Suction
- Use: spraying medium to low viscosity products
- Recommended applications: Paints, Clearcoats, lacquers and finishing products
- Recommended application distance: 15 to 18 cm
- Compatible quick connector: 1/4" M
- Use in ATEX zones: zones 1 and 2 according to manufacturer's declaration
Using the Classic Lux spray gun
The Classic Lux Polyester Primer Sagola 2.5 mm Nozzle is mainly used for applying polyester primer or filling primer to prepared bodywork components. Before application, the substrate must be sanded, cleaned, degreased and ready to receive the primer. The product should be mixed according to the primer manufacturer's instructions, then filtered before pouring into the Mixing cup.
Sagola recommends checking the viscosity of the product before use. This is important when using a polyester primer, as the wrong viscosity can cause uneven spraying, insufficient flow or an overloaded finish. The 2.5 mm Nozzle allows you to work with thicker products, but mixing and filtration are still essential to maintain a clean application.
During application, the gun should be held perpendicular to the workpiece. The recommended application distance is 15 to 18 cm. Regular application, constant coverage and a controlled flow rate ensure an even layer before Sanding or Topcoat.
After use, the spray gun should be thoroughly cleaned with a suitable cleaning solvent. The manufacturer also recommends spraying cleaning solvent before initial use to remove assembly grease. The use of abrasive or corrosive products is not recommended, as it may reduce the service life of the gun.
Advantages of the Sagola gun
The first advantage of the Classic Lux Sagola 2.5 mm Nozzle is its ability to apply polyester primers and fillers at a suitable flow rate. This ensures effective coverage of repaired areas, prepares substrates and provides an even work base before sanding, painting or Clearcoating.
By adjusting the product flow rate and fan width, you can tailor the application to suit the surface, the product used and the level of filling required. For bodybuilders, this flexibility is useful during repair work, particularly on areas requiring greater Preparation.
The Classic Lux is also easy to use and easy to integrate into any workshop. It meets the needs of professionals looking for robust equipment for Primer applications, without unnecessary complexity. Its design allows you to work efficiently on the bodywork preparation stages.
Its compatibility with finishing products, paints, Clearcoats and lacquers according to the manufacturer's instructions also adds to its versatility. The 2.5 mm Nozzle version is mainly used for polyester primers, fillers and preparation prior to the paint system.
Why choose Sagola Classic Lux Polyester Primer 2.5 mm nozzle?
When you choose the Sagola Classic Lux Polyester Primer 2.5 mm nozzle, you're choosing a professional gun for bodywork preparation work. It enables you to apply thick products such as polyester primer efficiently, with good flow control and even application.
This gun is ideal for workshops that want to prepare surfaces properly before painting, basecoating, Clearcoat or finishing. Its 2.5 mm Nozzle, easy adjustment and ability to spray preparation products make it a practical tool for bodywork repairs requiring a top coat.
Thanks to its professional format and the manufacturer's recommendations for use, the Classic Lux Sagola can be easily integrated into a workshop process. It meets the needs of body repairers looking for a reliable gun for applying polyester primer, improving substrate preparation and achieving a quality bodywork finish.
