Introduction to the Sagola 4600 HVLP
The Sagola 4600 HVLP with a 1.2 mm nozzle is designed for bodywork specialists looking for a high-performance spray gun for applying base coats in automotive repairs. It is part of the Sagola 4600 range, developed to offer a smaller, lighter and more comfortable spray gun equipped with Dynamic Flow Technology™. This technology allows for better control of the air around the cap, improving spray pattern stability, atomisation and spray consistency. :contentReference[oaicite:1]{index=1}
The HVLP version is designed for high-air-volume, low-pressure applications. It reduces the application distance, increases the transfer efficiency and minimises paint mist. For challenging base coats such as metallic, silver or pearlescent finishes, this consistency is essential to avoid defects in the finish, shading or colour irregularities.
Features of the 4600 HVLP
1.2 mm nozzle for paint base coats
The 1.2 mm nozzle enables a fine, even application of base coats. It is suitable for water-based and solvent-based products, offering a good balance between flow rate, spray pattern width and deposit control. This configuration is suitable for bodywork painting where colour accuracy and film uniformity are paramount.
DVR HVLP cap
The DVR HVLP spray cap is designed to deliver efficient application with reduced overspray. The manufacturer specifies an air consumption of 450 L/min, a spray pattern width of 290 to 325 mm, an application distance of 15 to 18 cm and an air inlet pressure of 2.0 bar for the DVR HVLP version. :contentReference[oaicite:2]{index=2}
Dynamic Flow Technology™
Dynamic Flow Technology™ enables better management of the air around the nozzle cap. It improves atomisation, stabilises the spray pattern, reduces bounce and overspray, whilst facilitating build-up layers. This technology also helps to minimise certain paint defects such as shading or mottling. :contentReference[oaicite:3]{index=3}
Robust design and simplified maintenance
The Sagola 4600 HVLP features a forged, anodised aluminium body and materials in contact with the product such as anodised aluminium, polyoxymethylene and stainless steel. Its Metal to Metal™ design reduces the number of seals, minimises wear parts and makes cleaning easier. :contentReference[oaicite:4]{index=4}
Key technical specifications
- Brand: Sagola
- Model: 4600 HVLP
- Nozzle: 1.2 mm
- Air cap: DVR HVLP
- Application: water-based primers, solvent-based primers, metallic, silver and pearlescent finishes
- Weight with cup: 675 g
- Weight without cup: 492.8 g
- Air inlet connection: 1/4” BSP male, high flow
- Product filter: 80 mesh
- Capacity of supplied cup: 650 ml
- Recommended operating pressure: 2.0 bar
- DVR HVLP air consumption: 450 L/min
- DVR HVLP output flow rate: 170 to 198 g/min
- DVR HVLP spray pattern width: 290 to 325 mm
- DVR HVLP application distance: 15 to 18 cm
- DVR HVLP air inlet pressure: 2.0 bar
- Average sound pressure level: max. 80 dB
Using the Sagola spray gun
The Sagola 4600 HVLP with a 1.2 mm nozzle is mainly used for applying base coats in automotive bodywork. Before use, the surface must be prepared, sanded, cleaned and degreased in accordance with the paint system being used. Water-based or solvent-based base coats must be mixed in accordance with the manufacturer’s instructions.
For optimal application, the recommended air inlet pressure is 2.0 bar and the recommended application distance is between 15 and 18 cm. These settings ensure a wide spray pattern, good transfer control and a uniform application onto the substrate. :contentReference[oaicite:5]{index=5}
During application, it is important to maintain a steady motion, a consistent distance and even coverage. With metallic or pearlescent colours, a stable spray pattern and uniform spray spread help to minimise variations in the finish and achieve an even colour.
Advantages of the Sagola 4600 HVLP
The primary advantage of the Sagola 4600 HVLP is its ability to minimise overspray. HVLP technology enables optimised paint transfer, which reduces paint wastage and improves the cleanliness of the application in the spray booth. For a body shop, this translates to increased productivity and better control over paint consumption.
The 1.2 mm nozzle offers excellent precision on basecoats. It allows colours to be applied evenly, particularly on metallic, silver or pearlescent bases. This configuration helps the bodywork technician achieve a consistent finish and better colour reproducibility.
Ease of use is also a key strength. The brochure highlights a lighter, more comfortable spray gun that is perfectly balanced, with a slim handle and a two-stage trigger for better control during spraying. :contentReference[oaicite:6]{index=6}
Why choose the Sagola 4600 HVLP with a 1.2 mm Nozzle?
Choosing the Sagola 4600 HVLP with a 1.2 mm nozzle means opting for a professional paint spray gun designed for water-based and solvent-based primers, as well as complex colours. Its DVR HVLP cap, 1.2 mm nozzle and Dynamic Flow Technology™ make it a high-performance tool for achieving an even application, a consistent finish and reduced overspray.
This spray gun is particularly suitable for body shop technicians looking for reliable equipment to improve application precision and workshop productivity. Thanks to its easy maintenance, robust body and spray control, the Sagola 4600 HVLP fits perfectly into a professional automotive repair environment.
