Properties of Sikkens Autocryl Plus LV R160 topcoat
This is a 2-component polyurethane topcoat for car repairs. FOR PROFESSIONAL USE ONLY. Complies with current VOC standards: 420 grams per litre.
Complementary products and additives
This product can be combined with various Sikkens hardeners, thinners and additives:
Preparing the surface
Clean the surface before sanding with a suitable cleaner. Carry out the final sanding mechanically with P500 or with water with P1000. Finally, clean the surface before applying the finishing lacquer.
CAUTION: When the polyester putty is exposed, avoid contact with water (water-based Degreaser).
Applying R160 topcoat
This topcoat is applied using a gravity gun with a 1.2-1.5 mm opening and an application pressure of 1.7-2.2 bar. Apply a medium coat, allowing 1-3 minutes for evaporation at 20°C. Then apply a full coat, also observing an evaporation time of 1-3 minutes at 20°C before steaming.
Drying time
Allow to evaporate for 5 minutes at 20°C before placing the car in a spray booth at 60°C. Evaporation time depends on application and temperature. Can be handled after approximately 10 minutes.
