Properties of Cromax 1470W waterborne basecoat
Cromax paints comply with Directive 2004/42/EC on VOC emissions. They are made from polyurethane copolymers. These Matt basecoats are easy to apply and offer excellent colour matching. Their perfectly balanced covering and filling properties increase productivity.
Preparation for Cromax 1470W Paint
Cromax basecoats are ready to use and require no thinning. Depending on the application conditions in terms of temperature and humidity, the bases must be mixed with binders:
For the exact proportions to be used, please consult the technical data sheet available to download in PDF format.
Preparing the surface for application of 1470W car paint
First, clean the surface with soap and water, rinse and dry. Degrease with a Preparation cleaner, then carry out any necessary repairs. Sand the surface to smooth out any irregularities mechanically (P400 - P500), or with water (P1000 - P1200). Remove all traces of sanding dust by blowing with compressed air. Finish by degreasing the area again with a final cleaner/degreaser.
Applying Cromax body paints
Cromax finishes are applied in 2 operations. Except for metallic and pearlescent colours, which require 2 coats followed by a light 3rd coat.
Base for 1470W base colour
Cromax hydro Matt basecoats can be applied to :
- All original and repaired finishes.
- Primers and 2K Refinish surfacers.
