Cromax Mixing Cromax 1406W - Black HS 0.5L

Properties of Cromax 1406W waterborne basecoat

Cromax paints comply with Directive 2004/42/EC on VOCs. They are made from polyurethane copolymers. These Matt basecoats are easy to apply and offer excellent colour matching. Their perfectly balanced covering and filling properties increase productivity.

Preparation for Cromax 1406W Paint

Cromax basecoats are ready to use and do not need to be thinned. Depending on the application conditions in terms of temperature and humidity, the bases must be mixed with binders:

• LV 1640WB binder (low viscosity)
• HV 1650WB binder (high viscosity)
• HT/FH WB400 Thinner

For the exact proportions to be used, please consult the technical data sheet available to download in PDF format.

Preparing the surface

Clean the surface with soap and water, rinse and dry. Degrease with a Preparation cleaner, then carry out any necessary repairs. Sand the surface to smooth out any irregularities mechanically using 400 or 500 grit abrasive paper, or wet using 1000 or 1200 grit abrasive paper. Remove all traces of sanding dust by blowing with oil-free compressed air. Finish by degreasing again with a final cleaner/degreaser.

Applying Cromax body paints

Cromax finishes are applied in 2 operations. Except for metallic and pearlescent colours which require 2 coats followed by a 3ᵉ light pass. No Flash-off between layers is necessary.

Base for 1406W base colour.

Cromax hydro Matt basecoats can be applied to:

• All original and repaired finishes.
• Primers and 2K Refinish surfacers.