Description Carross AMP-X Multi Premium Primer
This premium primer has very good adhesion to steel, aluminium, zinc and surfaces repaired with polyester putties.
This premium primer can be used as: high build primer / high build primer or wet-on-wet primer.
Application of Carross AMP-X Multi Premium Primer
Use in high build version:
- Mixing ratio 4:1 with Hardener for Multi Premium Primer AMPDU1
- Thin 10 to 15% with AMPDIG1 Thinner for Multi Premium Filler.
- Apply one to 2 coats with 10 min waiting time between coats using a spray gun with a 1.5 - 2 mm nozzle.
- Dry film thickness: 70-180µm
Use as a filler :
- Mixing ratio 4:1 with Hardener for AMPDU1 multi-premium primer
- Thinner 20% with AMPDIG1 Thinner for Multi Premium Filler Primer
- Apply one to 2 coats with 2-5 min waiting time between coats using a spray gun with a 1.6 - 1.8 mm nozzle.
- Dry film thickness: 40-120µm
Wet-on-wet application:
- Mixing ratio 4:1 with Hardener for AMPDU1 multi-premium primer.
- Thinner 30% with AMPDIM wet-on-wet multi-premium primer thinner .
- Apply in a single coat using a spray gun with a 1.3 mm Nozzle with 25-30 min waiting time before applying the Topcoat
- Dry film thickness: 20-30µm
Air-drying version:
- The substrate must be clean and free of grease.
- Mixing ratio 4:1 with AMPDU1 Hardener
- Thinner 30% with AMPDIAIR air-drying primer thinner.
- Apply 2 coats using a Spray gun with a 1.3 mm nozzle
- Wait 4 to 5 minutes between coats
NOTES :
This product has a very high filling power. For best results, keep the thickness of the dry finish coating at the maximum level of 180-200 μm. A higher thickness increases the drying time and may result in coating defects.
