Properties of PT144 PowerTint body paint
Cromax PT144 Paint features a 2-component lacquer system for solid colours. It provides a strong, glossy finish and has very good Theoretical coverage with low product consumption. This means it can be used for joints, panels and complete paints.
Preparing PowerTint PT144 Paint
Paints in the Cromax PowerTint range must be mixed with Thinner and Hardener:
For the exact proportions to be used, please consult the technical data sheet available to download in PDF format.
Preparing the surface
Wash the area concerned, then degrease with Cromax Refinish cleaner/degreaser. Carry out your repairs and sand the surface mechanically with 360 - 500 grit sandpaper or wet sand with 800 - 1000 grit sandpaper. Finalise your preparation by blowing off with oil-free compressed air and applying a final coat of Degreaser/Cleaner.
Applying Cromax PT144 PowerTint Paint
On a prepared surface, apply 2 full coats with at least 15 minutes between coats. For metallic colours, apply a third coat.
Substrate for PT144
PowerTint paints can be applied over all OEM finishes, surfacer primers and Imron Fleet Line surfacers.
