Description of the KS TOOLS Plastic Soldering Iron 960.1120 ?
The KS Tools 960.1120 soldering iron for plastics is an electric tool specially designed for repairing plastic parts on vehicles (bumpers, engine covers, plastic trim, etc.). It is a tool that can be used to weld or repair plastics by locally heating the area to be treated to remelt the material or mix plastic repair staples or sticks.
What are the technical specifications of the 960.1120 soldering iron?
- Power: 60 watts
- Voltage range: 120V or 230V depending on power supply
- Operating temperature: 0° to 400°C
- Total length: approx. 260 mm
- Cable length: 1.35 m
- Weight: approx. 960g
- Best use: spot repairs to plastics (cracks in bumpers, repairs to plastic wings, engine covers, etc.)
What are the advantages of using it in professional bodywork?
Using this plastic soldering iron in the workshop offers a number of key advantages for a bodybuilder:
1. Repair rather than replacement:
Allows you to repair cracks, breaks or tears in plastic parts without having to replace entire parts, which is often much more expensive and time-consuming.
2. Precision in small areas:
The tool's compact size and manoeuvrability mean it can target localised, hard-to-reach repairs without damaging the entire part.
3. Compatibility with various weldable plastics:
Useful for weldable plastic bumpers, wings and trim.
4. Durable solution :
Plastic welding, if done correctly, produces a solid repaired part that is resistant to mechanical stress, vibration and the demands of automotive use.
5. Practical in the workshop :
This soldering iron is ideal for small repairs and is ready to use, wired with a holder, making it reliable and easy to use for recurring or one-off repairs.
Why is this KS TOOLS brand 960.1120 soldering iron ideal for a body shop?
For a car workshop, the 960.1120 iron offers a good compromise between versatility, compactness and efficiency. It is particularly interesting for projects and different types of repair work on automotive plastics: bumpers, wings, engine covers or trim. Thanks to its power, high maximum temperature (up to 400°C) and professional design, this tool is a reliable solution for Plastic bodywork work.
How do I use the KS TOOLS 960.1120 soldering iron in car bodywork?
The plastic soldering iron is designed for repairing plastic parts. Correct use ensures a strong, clean and durable repair.
1. Preparation of the part :
Before any welding, the part must be properly prepared:
- Clean the surface: remove dust, grease and residues with a suitable Degreaser.
- Lightly sand: cracked or damaged areas with P80-120 grit to promote adhesion
- Separate fragile areas: if necessary, fix the part to a support to prevent it moving during welding.
2. Tool preparation :
- Plug in the soldering iron and wait for it to reach the required temperature
- Check the tip and accessories supplied: some repairs require special tips or welding rods.
- Have a stable surface on which to place the iron when not in use.
3. Soldering technique :
- Position the part so that you can easily access the area to be repaired
- Heat the damaged area with the tip of the iron to soften the plastic slightly
- Apply the plastic rod, gradually melting the material into the crack or break
- Smooth the joint with a spatula or suitable nozzle to obtain an even finish.
4. Cooling and finishing :
- Allow the Plastic to cool completely before touching or handling the part
- Sand lightly if necessary to obtain a flat surface.
- The repaired part can then be applied and painted like the rest of the vehicle
If you use the soldering iron correctly and follow its instructions, you'll get a durable, solid repair on automotive plastics and a part that's ready to be painted and put back in place.
Uses of the soldering iron in a body shop :
The plastic soldering iron is an indispensable tool for professional bodywork specialists. It can be used to carry out quick, durable and cost-effective repairs to Plastic vehicle components:
1. Spot-repairs on bumpers:
- Plastic bumpers are often cracked or broken after a light or moderate impact.
- A soldering iron can be used to fill the cracks, remelt the plastic and restore the strength of the part without having to replace it.
2. Repairing plastic wings and rocker panels :
- Composite fenders and rocker panels can crack.
- Plastic welding enables the fragments to be glued back together and ensures mechanical continuity, which is essential for the vehicle's safety and appearance.
3. Restoration of engine covers and other interior/exterior plastics :
- Engine covers, air vents, wheel arches and Plastic trim can break or crack.
- Using a soldering iron, these parts can be repaired locally without having to replace them completely.
4. Reconstruction of plastic structural parts :
- Some automotive plastics are part of the holding structure (headlamp supports, bumper reinforcements).
- Welding enables critical areas to be repaired while maintaining the mechanical strength required for safety.
In short, the plastic soldering iron is an ideal tool for all repairs requiring :
- Mechanical strength
- Resistance to stress and vibration
- Aesthetic appearance, whether on bumpers, wings, engine covers or interior/exterior trim.
In conclusion, there is now a wide range of tools specially designed for Plastic repairs, enabling body repairers to work with precision on all materials encountered in the workshop. Thanks to their ergonomics and quality, these tools - whether soldering irons, Pliers or any other product - offer the best possible experience for carrying out every stage of the repair. Always available and easy to use, this professional equipment quickly becomes indispensable, for the good reason that it guarantees long-lasting, perfectly controlled repairs.
