Introducing the Satajet 100 B F RP
The SATAjet 100 B F RP 1.6 mm nozzle is a bodywork preparation spray gun designed for professionals looking for a reliable tool for applying primers, fillers and undercoats. The manufacturer says that the SATAjet 100 B enables primers and fillers to be applied in a continuous flow despite their higher viscosity, thanks to its wide spray pattern and fine atomisation.
The configuration with a 0.6 L QCC PVC cup is practical for everyday applications in the workshop. The QCC system makes it easy to fit the cup, so it can be used quickly during bodywork repairs. This 1.6 mm Nozzle version is referenced with the QCC PVC 0.6 L reusable cup under the reference SATA 145193.
Features of the Satajet 100 B spray gun
1.6 mm Nozzle for Primer and Filler
The 1.6 mm Nozzle can be used to apply heavier products than a thinner nozzle. It is suitable for primers, fillers and preparation products used before base paint, Clearcoat or finishing. This configuration ensures an even coat, effective coverage of prepared substrates and reduced rework before sanding.
RP technology for fast application
The RP technology of the SATAjet 100 B F enables fast application while maintaining good spray quality. It is ideal for workshops looking for productivity, consistency and control of the deposit during bodywork preparation.
QCC PVC 0.6 L bucket
The QCC PVC 0.6 L bucket offers a capacity suited to routine repairs and Primer applications. Its reusable design means you can work with a comfortable volume without overloading the gun. The QCC system makes it easy to assemble and disassemble the bucket, improving the flow of work in the workshop.
Technical data
- Brand: SATA
- Model: SATAjet 100 B F RP
- Nozzle: 1.6 mm
- Cup: QCC PVC reusable 0.6 L
- Nozzle configuration reference 1.6 with QCC PVC cup: 145193
- Technology : RP
- Application : Primer, primer, filler, bodywork Preparation
- Inlet pressure : 1.5 to 2.0 bar
- Air consumption at 2.0 bar : 290 Nl/min
- Recommended application distance: 17 to 21 cm
- Nozzle set 1.6 RP: 145250
Using the Satajet 100 B F RP
The SATAjet 100 B F RP 1.6 mm Nozzle is mainly used to apply primers and body preparation products. Before use, the surface must be sanded, dusted, cleaned and degreased. The product applied must be prepared in accordance with the manufacturer's recommendations, then filtered if necessary to ensure even spraying.
For optimum application, the recommended inlet pressure is between 1.5 and 2.0 bar. Air consumption for the SATAjet 100 B F RP is quoted at 290 Nl/min at 2.0 bar, with a recommended spray distance of 17 to 21 cm. :contentReference[oaicite:2]{index=2}
The 1.6 mm Nozzle allows you to work with a flow rate suited to thicker Preparation products. During application, the spray gun should be kept at a constant distance from the substrate, with a regular stroke and even coverage. This method produces an even coat, ready to be sanded or overpainted depending on the Paint system used.
After application, cleaning the spray gun is essential to maintain a constant spray pattern. The Nozzle, needle, cap and fluid circuit must be thoroughly cleaned with a suitable product. Regular maintenance will prolong the life of the gun and maintain professional application quality.
Advantages of the Sata gun
The SATAjet 100 B F RP 1.6 mm Nozzle offers even application of primers and fillers. Its more open nozzle makes it easier to handle heavier preparation products, while maintaining a fine spray and a wide spread. This configuration helps the bodybuilder to achieve an even coat and save time on the preparation stages.
RP technology provides a good balance between application speed and deposit quality. It provides effective coverage of surfaces prior to Sanding, Paint base or Clearcoat. For a bodyshop, this represents a direct advantage in terms of productivity and consistency of finish.
The QCC PVC 0.6 L cup makes daily use easy. It allows you to prepare the right amount for the job, while keeping the gun easy to handle. This configuration is practical for both localised repairs and bodywork parts requiring wider application.
Why choose the SATAjet 100 B F RP 1.6 mm nozzle?
Choosing the SATAjet 100 B F RP 1.6 mm nozzle with QCC PVC cup means opting for a reliable, productive bodywork Preparation gun that is suitable for priming products. It meets the needs of professionals who regularly apply primers and fillers before the paint and finishing stages.
Thanks to its 1.6 mm Nozzle, wide fan, RP technology and 0.6 L QCC PVC cup, this gun ensures even application, reduces rework and improves the quality of Preparation before finishing. It's perfect for body shops looking for performance, consistency and time savings.
